Full-tower Hydraulic ATX Computer Case, Screwless mounting mechanism for an 8x8cm case fan in the front. Space available for a 6x6cm case fan and a 8x8cm case fan in the back. Case fans are optional. Power supply is optional. Model SF-880W. Color: Beige.
Features: One touch, unique Hydraulic Sliding-Down Door. Removable side panels with groove. Pull out motherboard tray. Rear cooling vent open for extra CPU fan upgrade. Front cooling vent open for extra 8x8cm fan upgrade. One 8x8cm side fan. AT or 2.01 / 2.03 ATX compatible. 1.1mm gauge "no finger cut treated" sheet metal. Easy Pull out HD cage.
Dimension: 7.5"(W) x 17.5"(D) x 24.5"(T)/ 191 x 445 x 622 mm. Capacity: 6 x 5.25" & 1 x 3.5" External drive spaces + 3 x 3.5" Internal HD spaces inside + 3 Cooling Vents.
Availability: Sorry, this item is sold out. No ETA.
Limited Warranty: One year from invoice date with Directron.com. 30-Day money back from receiving date with 20% restocking fee for non-defective returns. No credit or refund for used and mounted cases No credit or refund after 30 days. Customer is responsible for returning manufacturer defective products including DOA unless testing is paid before shipping.
Notes: (1) The word "hydraulic" may be misleading to some users. It is actually a dampened fall. The push-button will cause the cover to go down automatically; however, you have to manually lift the cover up. (2) Question about the connection options for the case fan? Click here for answer. (3) Received a "dead" ATX power supply? Click here. (4) The original 230W power supply that came from the manufacturer is of low quality. Upgrading it is highly recommended. (5) This case is now Intel Pentium 4 ready. A P4-ready power supply is needed for P4. (6) A P4-ready case can also be used for Athlon, Pentium III and other non-P4 processors/motherboards. (7) When the front cover is down, it does not significantly affect the air flow for the front intake case fan since there is a large gap between the cover and the front of the case on the top and the bottom of the cover. (ud081804mp)
Warning: The hard drive and floppy drive mounting cage sometimes may come loose during transportation. There is a case screw on the back of the cage that can be accessed from the motherboard side. Make sure that screw is there and tightened. You must unscrew that screw to remove the drive cage. Sometimes, this case comes in without that screw. Alternatively, we suggest securing the cage to the case by using plastic zip ties, especially if you plan to ship the system you are building.