as a potential bottleneck when overclocking. THE REDLINE MEMORY MODULES ARE DESIGNED TO RUN AT HIGHER VOLTAGES UP TO 3.5V AND SUFFICIENT COOLING IS A REQUIRED.
Active Cooling Required --Due to the extreme speed of these modules along with the added voltages used, Mushkin requires end users to Actively cool their memory modules. Modules that are not properly cooled will/may not meet rated timings and speeds, and may become susceptible to premature failure. We generally recommend 15-25cfm of direct airflow over the ram modules which can be easily accomplished with one 60mm or 80mm low rpm fan. This will insure increased stability and lifespan of your Redline modules.
Recommended Platforms--- Mushkin tests all Redline memory modules on Athlon64 platforms. Furthermore, when running two modules, only Socket 939 platforms are validated to run at rated specifications/timings. We currently recommend and validate the Redline memory series on the DFI LanParty UT NForce4 Ultra-D, DFI LanParty UT NForce4 SLI-DR, and DFI LanParty NForce4 SLI-DR boards as they provide the best combination of voltage options and compatibility for the Redline Series. Other motherboards may work, but may require modification for adequate voltages, and may not produce optimal results. Single Channel Athlon64 systems may have a hard time running 2x512mb dimms at rated speeds due to memory load on the single channel memory controller. Pentium4 and AthlonXP systems generally will not obtain rated specifications secondary to motherboard/memory controller limitations. These modules are compatible with most motherboards for Pentium4/AthlonXP CPUs, however end users are advised that lower frequencies achieved.
Features & Specifications:
Model: 991439.
Capacity: 512MB.
Frequency: 500MHz .
Latency: (CAS-TRCD-TRP-TRAS) CAS 2-2-2-6.
Parity: Unbuffered, Non-ECC.
Speed: PC4000.
Voltage: 3.3V-3.5V.
Module Density: 64Mx64.
Chip Density: 32Mx8.
Pins: 184.
Package: Jet Black 6 Layer PCB.
Heat Spreader: Yes (color may vary).
Single DIMM.
Availability: Sorry, this item is sold out. No ETA available.
Limited Warranty: Life-time equal replacement warranty from Mushkin. Physical damage not covered. 7-Day money back from receiving date with 15% restocking fee. No refund or upgrade after 7 days. Customer is responsible for returning manufacturer defective products including DOA unless testing is paid before shipping. Mushkin’s Customer Support at 1-800-569-1868. (hxz052405)