2-Position, Ultra-Miniature, Fully Illuminated G Series Toggle Switch w/ LED, Color: Green
G series ultra-miniature, fully illuminated toggle switches. The process-compatible, toggle-actuated G series toggle switch offers engineers a functional and aesthetically pleasing option for designing hand-held and front panel user-interfaced devices. The G series' lightweight makes it suitable for applications ranging from video cameras, audio/broadcast equipment and electrical guitars to medical equipment. Available in red, green, amber and bicolor red/green LEDs, the G series toggle actuator is made of clear polyamide that allows the LED color to fully illuminate the entire actuator. The switch measures .276" in height and width and .177" in depth. The illuminated toggle actuator measures .150". The G series' standard PC terminal spacing enables high-density mounting and is available in straight PC, vertical or right angle mount. 2-Position. Colors: Green G12JPF, Amber G12JPD, Red G12JPC.
Specifications:
Electrical Capacity (Resistive Load),Logic Level: 0.4VA maximum @ 28V AC/DC maximum(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Other Ratings
,Contact Resistance: 80 milliohms maximum,Insulation Resistance: 500 megohms minimum @ 500V DC,Dielectric Strength: 500V AC minimum for 1 minute minimum,Mechanical Life: 100,000 operations minimum,Electrical Life: 100,000 operations minimum, 10,000 operations minimum @ 0.1A @ 28V AC/DC,Nominal Operating Force: 1.3 Newtons,Angle of Throw: 28o Materials & Finishes,Actuator: Polyamide
,Case: Glass fiber reinforced polyamide,Sealing Rings: Nitrile butadiene rubber,Movable Contacts: Phosphor bronze with gold plating,Stationary Contacts: Phosphor bronze with gold plating,Base: Glass fiber reinforced polyamide,Power Terminals: Phosphor bronze with gold plating,Lamp Terminals: Phosphor bronze with gold plating Environmental Data,Operating Temp Range: -25oC through +55oC (-13oF through +131oF),Humidity: 90 ~ 95% humidity for 96 hours @ 40oC (104oF),Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours,Shock: 50G (490m/s 2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation,Soldering Time & Temperature: 3 seconds @ 350oC or 5 seconds @ 270oC,Process Seal: See Supplement Index (page Z2) for specific processing data.
Standards & Certifications,UL Recognition or CSA Certification: The G Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
Notes: (1) Proper installation is required to use this product. (2) Wires are not included in this product. (hyz020706)