Instructions for GlobalWin FOP-32-1 Socket A CPU Cooler
Contributed by Brian Waltrip
You are encouraged to make links to this article from your website and tell your friends
The following advice is based on many years of experience. They are provided as a free service to our customers and visitors. However, Directron.com is not responsible for any damage as a result of following any of these advice. You are welcome to distribute these tips free to your friends and associates as long as it's not for commercial purposes.
Step-1 Preparing the cooler:
When you take the FOP-32 out of the box you will notice that there is a small amount of thermal interface material on the bottom. This material will help to conduct heat away from the CPU and to the cooler. Before you can install the cooler you must check the bottom of the cooler, and remove any foreign objects that may be there. Do this by brushing it with a smooth, clean cloth.
Step-2 Preparing the motherboard:
To properly install the cooler your motherboard needs to be on a flat hard surface. A good way to do this is to mount your motherboard in the computer case and then proceed with installing the cooler. Before installation you should put the FOP-32 cooler up to the CPU socket. This is to make sure that the cooler will fit your particular motherboard.
Step-3 Mounting the FOP-32 Cooler:
Take the cooler in your hand, holding it from the top. Place the cooler on to the socket. Use your finger to press the clip onto the slug of the socket. The slugs are the small knots on either side of the socket. Insert a flat head screwdriver into the notch on the other side of the metal clip. Push down on the clip with the screwdriver until the hole on the clip snaps into place, over the slug. *Note-When installing any cooler, do not apply force to the cooler itself. Only apply force to the metal clip. Applying force to the cooler itself could cause you to crush the CPU die.
Step-4 Connecting power to the fan:
Connecting power to the fan of the FOP-32 is very simple.
Take the power cord and attach it to the three-pin fan header that is near the socket. If you are not sure which one it is, please, consult your motherboard manual.
Make sure that the FOP-32 is mounted flatly on the CPU. If the cooler is not on straight then it will not work properly. Make sure the FOP-32 is mounted tight to the CPU. This way the cooler is making good contact with the CPU. Make sure that the FOP-32 itself is not touching anything else besides the CPU. If it is touching any of the capacitor could ruin your motherboard. Also, make sure the fan is connected and is working.
Be careful, not to press too hard when mounting the cooler. You can also use your finger to apply force to the cooler clip if you don't feel comfortable using a screwdriver. Work on a clean, flat surface with plenty of light.
Directron.com is not responsible for any damage as a result of improperly mounted CPU coolers.
| Go to Top | Directron.com Home |
Copyright © 2007, Directron.com. All Rights Reserved.
If you find this article useful, please create a link to it from your website or tell a friend about it. If you have any comments or suggestions about this article, please email firstname.lastname@example.org