Would you like to be notified when this item is available?
Enter your email address below and click Auto-Notify to receive automatic notification.
Part Number: LED-Green
3.3V, 5mm, LED, Pre-wired with Connectors, Replacement for PC Cases, Color: Green
Pre-wired LED with connectors. OEM bulk pack. Two wires and two connectors. 3.3V. 24" or 62cm long. 5mm or 3/16" in diameter. Very bright, diffused color. Four colors to choose from: Blue, Red, Green, and Yellow/Amber. Great to replace the existing (boring) green or amber LEDs in computer cases for power and/or hard drive. Pre-wired with connectors. Ready to be plugged to your motherboard and play! Color availability: Green, Red, Yellow/Amber, Blue.
Installation: This LED is designed for computer cases. You can connect it to the Power LED or HD LED connectors on your motherboard. The LED connectors on motherboards are sometimes three-pin and sometimes two-pin. This device comes with two pins that are split, making it possible to work with both 3-pin and 2-pin connectors on motherboards.
Warning: The white wire is for Ground and the blue is for positive. It may not work if the polarity is reversed.
You have to install the LED to the front bezel of your case yourself. You may have to remove the existing LEDs on the bezel to install this replacement. You may have to glue the LED to the front bezel.
Notes: (1) Directron.com is not responsible for any damage as a result of using this or any products. (2) There is a polarity on the LED. It should work only in one way. (3) There is no need for toggle switch for this LED. (4) You can use it to replace either power or hard drive LED.
Limited Warranty: 30-day from invoice date with Directron.com. 7-Day money back from receiving date with 15% restocking fee for non-defective returns. No credit or refund after 30 days. Customer is responsible for returning manufacturer defective products including DOA unless testing is paid before shipping.
(hyz121705)