Rambus' RDRAM memory interface enables exceptional system bandwidth-to-cost ratios for a broad range of consumer electronic, networking and computing applications. Systems implementing the RDRAM memory interface benefit from the highest bandwidth per pin. The RDRAM memory interface achieves its high-speed design with innovative architectural and circuit features such as a highly efficient packet-based protocol, pipelined command and data, low-voltage signaling and precise clocking to minimize skew between clock and data lines.
The 32 Bit RIMM module is a general purpose high-performance line of memory modules suitable for use in a broad range of applications including computer memory, personal computers, workstations, and other applications where high bandwidth and low latency are required. The use of Rambus Signaling Level (RSL) technology permits the use of conventional system and board design technologies. RIMM 3200 modules support 800MHz transfer rate per pin, resulting in total module bandwidth of 3200MB/s or 3.2GB/s. RIMM 4200 modules support 1066MHz transfer rate per pin, resulting in total module bandwidth of 4200MB/s or 4.2GB/s. The 32 Bit RIMM module provides two independent 16 or 18 bit memory channels to facilitate compact system design. The RDRAM architecture enables the highest sustained bandwidth for multiple, simultaneous, randomly addressed memory transactions. The separate control and data buses with independent row and column control yield over 95% bus efficiency. The RDRAM device multi-bank architecture supports up to four simultaneous transactions per device.
Features & Specifications:Memory Size: 256MB.
Bus Clock: PC1066 (533MHz), Also Supports PC800.
Pins: 232-Pin, Gold Contacts.
Module Type: RDRAM (Rambus Dynamic Randum Access Memory).
Memory Type: RIMM (Rambus In-Line Memory Module) Type.
Data Integrity Check: Non-ECC.
Speed: 32 ns.
Chip Configuration: 128 x 16 (each module).
Supply Voltage: 2.5V.
Limited Warranty: One year from invoice date with Directron.com. 30-Day money back from receiving date with 15% restocking fee for non-defective returns on current market price. No credit or refund after 30 days. Customer is responsible for returning defective products including DOA due to manufacturer unless testing is paid before shipping.
Notes: (1) The following products are 232-PIN Chips, not the standard 184-PIN, and work only in a few systems. Please make sure you are purchasing this chip for use in a 232-PIN RAMBUS System. (2) Standard Rambus RIMM memory modules are non-ECC (error correction), non-registered, and non-buffered memory modules. ECC and registered memory modules are normally for servers that require these features and more expensive. (3) Rambus memory requires pairs to work. (Alice-012506)