Part Number: COOL-NV-Silencer4 Regular price:$27.99On Sale:
Arctic VGA Coolers - NV Silencer 4
The Arctic VGA Coolers NV Silencer 4 features extremely quiet and unique cooling performance, with efficient memory cooling and high service life (L10 at 30oC: 274000h).
Features: Extremely Quiet:
A large fan and optimized fanblades offer a minimum noise level at a high air flow.
Unique Cooling Performance:
Highest fin surface area and a 2.5 mm thick copper base achieve best cooling performance at its noise level.
Efficient Memory Cooling:
With this highly efficient heatsink the memories get cooled up to 6 times better than without memory cooling.
High Service Life (L10 at 30oC: 274000h):
Our ARCTIC Ceramic Bearing (alloy bearing and Ceramic shaft) provides our fans with an outstanding service life.
DHES (Direct Heat Exhaust System):
The DHES draws cool air from inside the case and exhausts warm air outwards. This prevents the fan from recycling warm air to cool the GPU, which increases cooling performance.
Further the DHES lowers the air temperature inside the case, because the heat of the GPU will be carried out directly.
Easy Installation:
Compared to our VGA Silencer, we could ease the installation process significantly.
Specifications: Fan: 72 mm
Overall Dimensions (active GPU Cooler): 218.5 x 100 x 31 mm.
Overall Dimensions (passive Memory Cooler): 218 x 97.8 x 36 mm.
Rated Fan Speed: 2000 RPM.
Bearing: ARCTIC Ceramic Bearing.
Noise Level: 0.5 Sone.
Compatibility:
With this height restriction drawing you can check your VGA board for compatibility with our cooler.
First you have to check the position of the mounting holes. Then check the height of the components.
If some components are slightly higher than our fancasing allows, you can relatively easy cut the fan casing.
To do so we suggest you first to uninstall the fancasing bottom. Then cut the bottom in the area of the component that caused the conflict and reinstall the bottom again.
We use ATIs respectively NVIDIAs standard power plugs. Asus is unfortunately not following ATIs/NVIDIAs solutions and therefore our plug doesn't fit. You can either cut both plugs and connect the wires correspondingly or you can also get 12 Volt power directly from the PSU. There you have to connect the wires as follows: black with black and red (VGA) with yellow (PSU). The yellow cable from the VGA is an RPM signal, that is not needed.
Limited Warranty: One year from invoice date with Directron.com. 30-Day money back from receiving date with 15% restocking fee for non-defective returns. No credit or refund after 30 days. Customer is responsible for returning defective products including DOA due to manufacturer unless testing is paid before shipping.(ljh120604)