(713) 773-9898CONTACT US
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • EnGenius EAP900H High-Powered Long-Range Dual-Band N900 Indoor Access Point. EnGenius EAP900H High-Powered Long-Range Dual-Band N900 Indoor Access Point.
  • EnGenius EAP900H High-Powered Long-Range Dual-Band N900 Indoor Access Point. EnGenius EAP900H High-Powered Long-Range Dual-Band N900 Indoor Access Point.
Previous

EnGenius EAP1750H 802.11ac 3x3 Dual Band Ceiling-Mount Wireless Access Point/WDS.

Previous

TP-LINK RE200 AC750 Universal Wi-Fi Wall Plug Range Extender, IEEE802.11ac, 3 x Internal Antenna

EnGenius EAP900H High-Powered Long-Range Dual-Band N900 Indoor Access Point.

Be the first to review this product

Availability: Drop ship

$249.99

DROP SHIPPED ITEM:

This item is shipped from our affiliate facility. The stock level is not under our control and is subject to change. We will contact those that order this item in the event of a problem. If this item is ordered together with other products, this item may be shipped separately and may arrive separately.

Details

The EnGenius EAP900H is a Dual Band Wireless N900 Indoor Access Point that features high transmit RF power of up to 28 dBm on both the 2.4 and 5 GHz frequency bands delivering connectivity to wireless laptops, tablets, smartphones and other devices within 3 floors of a typical office building, hotel or other multi-floor structure. With wireless speeds up to 450 Mbps on each radio and a Gigabit port for connecting to a switch or router, the EAP900H is ideal for expanding a network with additional bandwidth to support newer dual-band enabled devices.

Features:
  • Up to 28 dBm transmit power enabling long range connectivity
  • Supports IEEE 802.11a/b/g/n wireless standards with up to 450 Mbps data rate on each band
  • Six internal 5 dBi omni-directional MIMO antennas
  • Can be monitored with EnGenius EZ Controller software for Windows (Free online download)
  • Can be used with included power adapter or via PoE with PoE 802.3at - capable switches or injectors
  • SSID-to-VLAN Tagging


Specifications:
  • Hardware
    - RF: 2.4 and 5 GHz Frequency Bands
    - Standard: IEEE 802.11a/b/g/n
    - Radio I: 11b/g/n: 2.412~2.484 GHz
    - Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
    - Data Rate: Up to 450 Mbps in both frequency bands
    - Memory: 64MB
    - Flash Memory: 8MB
    - Peak Power: Up to 22W
  • Antenna
    - Six (6) Internal 5 dBi Omni-Directional Antennas
  • Physical Interface
    - 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
    - 1 x Reset Button
    - 1 x Power Jack
  • Power Requirements
    - Power Supply: 90 to 240 VDC +/- 10%, 50/60 Hz (depends on different countries)
    - Active Ethernet (Power-over-Ethernet, IEEE 802.3at)
    - Power Adapter (United States) 48VDC/0.375A
    - Device: 12V/2A
  • Modulations
    - OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
  • Operating Channels
    - 2.4 GHz: US/Canada 1-11
    - 5 GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
  • Software
    - Topology: Infrastructure/Ad-Hoc
    - Operation Modes: Access Point, WDS Bridge, WDS Access Point
    - Multiple BSSID: Supports up to 8 BSSIDs per radio
    - LAN: IP (check validity and DHCP server IP range) MAC
    - SSID-to-VLAN Tagging: Supports 802.1q SSID-to-VLAN tagging
    - Spanning Tree: Supports 802.1d Spanning Tree Protocol
    - Wireless:
      - Wireless Mode: 11a/11b/11g/11n
      - Channel selection (settings vary by country)
      - Channel bandwidth (Auto, 20 MHz, 40 MHz)
      - Transmission rate:
      2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
      5 GHz: 11n only, 11a/n mix, 11a only
    - QoS: WMM (Wireless Multimedia)
    - VPN: Pass-through (PPTP, L2TP, IPSec)
    - WPS: Software only
  • Management
    - Tx Power Control: Adjust transmit power by dBm
    - Configuration: Web-based configuration (http)/Telnet
    - Telnet Server: CLI
    - Firmware Upgrade: Via web browser, settings are reserved after upgrade
    - Administrator Setting: Administrator Username and Password Change
    - Reset Setting:
      - Reboot (press 1 second).
      - Reset to factory default (press 10 seconds)
    - System Monitoring: Status Statistic and Event Log
    - SNMP: V1, V2c, V3
    - MIB: MIB I, MIB II (RFC1213) and private MIB
    - Traffic Shaping: Incoming and outgoing wireless traffic shaping
    - Auto-channel Selection: Automatically selecting least congested channel
    - Bandwidth Measurement: IP range and bandwidth management
    - Auto Reboot: Reboot Access Point by minute, hour, day, or week
    - Backup and Restore: Save and restore settings through Web interface
    - CLI: Supports Command Line Interface
    - Diagnosis: IP pinging statistics
    - Log: SysLog and Local Log support
    - LED Control: On/Off
    - AP Detection: Scanning for available EnGenius Aps
    - Wireless / Network
      - PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode (this function will keep trying when failed or disconnected)
      - PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
    - Wireless Security
      - WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
      - WPA/WPA2 Enterprise (WPA-EAP using TKIP)
      - 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
      - SSID broadcast enable/disable
      - MAC Address Filtering, Up to 50 field
      - L2 Isolation (Access Point mode)
      - Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
    - QoS (Quality of Service): WMM (Wireless Multimedia)
  • Environmental & Physical
    Temperature Range
    - Operating: 0 to 50°C (32° to 122°F)
    - Storage: -20°C to 60°C (-4F° to 140°F)
    Humidity (non-condensing)
    - Operating: 90% or less
    - Storage: 90% or less
    Certifications: FCC, IC


Additional Information

SKU eap900h
Model EAP900H
Manufacturer EnGenius
UPC No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review